DIY Vertical Wind Generators Are They Worth It?

With the ever increasing need for everybody to be more careful with the environment (and in today’s climate their money) have you ever thought about building your own DIY Vertical Wind Generator? These units are much like the usual generators except the blades are positioned vertically rather than horizontally.

It is easy to build a DIY Generator from plans for normal wind generators. All that is needed is to turn the blades vertical. All the components need to build a DIY Vertical Wind Generator can be found in your local DIY store for as little as $200.

So why build a DIY Vertical Wind Generator Tools and supplies rather than a normal generator? Since the blades are positioned vertically rather than horizontally you have the option of putting more blade units on the generator since there is more space. It won’t necessarily generate more energy but it will allow the blades to become more sensitive to wind, allowing for power to be generated even in slight breezes; something that is not always possible with the conventional wind units.

The units can also be built to be much more compact that the usual wind turbines. This makes them ideal for people who do not have a lot of outside or roof space and can even be set up to sit on apartment balconies or outside walls. You don’t even need a stand that rotates with the wind as the blades are sensitive even in a fixed position. The electronic side of setting up the DIY vertical wind generator is not all that complicated either. There are plenty of electronic blueprints out there that will show you how to set this up.

If self-sufficiency is what you are after then you will probably need at lease three to four units. If you want to ensure that you will still have power during a power outage then you will need to fit batteries to the unit. This allows electricity to be stored and be readily available to use. The downside is that these batteries can increase the cost of building the units. My suggestion would be to have a few units with batteries and the other directly connected to the grid. This would allow essential energy to be provided in cases of power outages.

Comments are closed.